"Eyeglass Case Designs" to Embroider

These Eyeglass Cases are quick, fun and easy to make. There are two different design files
to embroider depending on the size of your hoop. For the Embroidery Machines with a 8" x 8" hoop
(200 mm x 200 mm) the cases are embroidered in one hooping. For Embroidery Machines with smaller
hoops, at least 5" x 7" (130 mm x 180 mm) you will embroider them in two hoopings, front and back.

There are ten (10) different designs to choose from, and once you finished embroidering the designs,
all you have to do is stitch them together on your sewing machine. Width of seam will depend on whether
you want sunglasses or cases for your other glasses.

I chose to make this type of eyeglass case (you need to stitch together on sewing machine)
instead of one that is done completely in the hoop because the eyeglass case designs I've
embroidered with satin stitch borders have frayed around the edge and not as pretty as they used to be.

Accompanying each eyeglass design is a PDF file with complete instructions
(including images) for creating and embroidering these cases.

Design specs for the eyeglass cases are below showing the one (1) hooping and two (2) hoopings.
Just click on the down arrow and choose your eyeglass case, then click on Add to Cart.

Designs come in DST, EXP, HUS, JEF, PES, VP3 and XXX,
Designs require stabilizer, fabric and batting

$7.00 per Eyeglass Case

Specify Eyeglass case

The Design information below is for the 8" x 8" hoop (one hooping).

The Design information below is for the 5" x 7" hoop (two hooping).

$7.00 per each eyeglass case

Specify Eyeglass case